How about to split this site A-N M-Z ?
[2024-07-25 [simokun]]
we have a big problem, we are at 289 monitors and we have reached the maximum character limit for a page on wikidot
ERROR: Page source too long (max. 200000 characters)
… wikidot alternatives?
2024-07-16 [simokun]
Hello, to make the table more readable:
I propose to remove the "Panel Type" column and move "Sync on Green" data in the comments,
do you like the idea?
Hello,
today i test NEC 2170nx (work not), 1970nxp (work) and 1970nx (work) at MDA, CGA, EGA (necroware MCE-Adapter without scandoubler) and add the test result.
Hello,
I have a DELL ST2220T, i tested it with an Atari 1040STE, the three resolution work fine, full support 15Khz on the VGA input. The screen can be set in 4/3 or 16/9.
regards
Hello,
I've tested a BenQ RL2455HM. Full support 15KHz on the VGA input. Tested a Megadrive in both PAL and NTSC modes. Used a SyncStrike adaptor. The screen can be set in 4/3 or 16/9. Must change color mode from YUV to RGB manually,
Dell 1908FPc - Does not work.
I have compiled a personal list of 15khz monitors that work with my Amiga 500 NTSC at http://goldenchild2.blogspot.com
My list of monitors that will sync to Amiga 500 NTSC 15khz signals with a buffered VGA adapter:
Amiga 15khz monitor list:
- Acer B226WL
- Acer B227Q bmiprx (slightly blurry image unenhanced, the only sharpness adjustment is super-sharpness on/off, with super-sharpness on image is acceptable)
- Acer B246HL
- Acer R240HY
- Acer S220HQL
- Acer G226HQL (panel has narrow viewing angle)
- Acer G235H
- Acer G276HL
- Acer H226HQL bid (tested with 15khz tester)
- Acer H276HL
- Acer H233H bmid (from 2010, adjusting horizontal clock or activating auto adjust will make image unstable (horizontal jittering) until you either powercycle or cycle the monitor input from VGA to HDMI and back to VGA)
- Acer KA272 bi (2020) (works with 15khz tester)
- Acer V196HQL Ab (panel has narrow viewing angle)
- Acer V203H Cjbd
- Asus VE228
- Asus VE248H (2017)
- Asus VE248Q (works with 15khz tester)
- Asus VH238 (warning: I have also found an Asus VH238H that does not work with a 15khz tester, so maybe not all Asus VH238 work.)
- Asus VS248P
- Benq RL2755-B (OSD info says RL2755T)
- Dell P2210
- Dell ST2210b
- Dell ST2410b (wants to auto adjust upon Amiga boot/reset)
- Dell ST2421Lb
- Dell P2310
- Dell U2410 (auto adjust works well, manually changing the phase/clock will make the screen will go wonky, cycle inputs to return to normal, zoom to 15 will fill the screen)
- Dell U2212HMc (93 for pixel clock, 10 for hpos, 80 for vpos is perfect)
- Dell E2213Hb (note that the E2213c does not work with 15khz signals but the E2213Hb does work with 15khz signals)
- Dell E2214Hb
- Dell P2214H
- Dell P2314H
- Dell E2414H
- Dell P2414H
- Dell SE2717H
- Dell P2018H
- Dell 1220 Projector
- Epson EX3220 Projector
- Epson VS340 Projector
- HP Elitedisplay E231i (this is the one with the IPS panel, the EliteDisplay E231 doesn't work)
- Infocus ScreenPlay 4805 Projector (works with non interlace on M1-DA interface with VGA/USB cable, but interlace is scrambled and unusable)
- Lenovo LT2252p wide (switching from interlace to non interlace can cause screen to go blank, either reset amiga or use dpaint 3 to change resolution to bring it back, recommend non interlace only)
- NEC Multisync E222W (tested with 15khz tester)
- NEC Multisync EA241WM (detects a500 NTSC as 640x200 (completely fills screen to edges) when in non-interlace and 720x480 when in interlace (displays inset from edges))
- NEC Multisync EA261WM (tested with 15khz vga tester, 320x240 fills screen like EA241WM, assume it has similar behavior to EA241WM, very heavy 27 lbs)
- NEC VT570 Projector
- Planar PLL2210W (interlace is normal size)
- Planar PLL2410W (non interlace mode ok, interlace modes are double width so right half is off screen)
- Philips 17PF8946/37 17" LCD TV
- Sceptre E275W
- Seiki SE22HY01 Television
- Viewsonic VA2246mh-LED
- Viewsonic VA2259-smh
- Viewsonic VA2703-LED (auto adjust puts vertical screen position halfway up, but position/size can be manually adjusted)
- Viewsonic VA2746mh-LED (tested with 15khz tester only)
- Viewsonic VG2239m-LED (auto adjust puts vertical screen position halfway up, but position/size can be manually adjusted)
- Zalman Trimon MZ240ED (screen goes blank for a few (5-20) seconds while switching from interlace to non interlace, otherwise fine, recommend using non interlace only)
One thing I've noticed is that almost all of the monitors do the same "wrong line" interlace display on Amiga signals. The Seiki SE22HY01 Television does proper deinterlacing that looks good. Also the Dell U2410 will do a proper job with interlace.
Projectors will typically take a few seconds to lock on to the signal when you switch to interlace from non-interlace and vice versa.
After purchasing and finding many monitors that don't work, a 15khz tester from pcbjunkie has helped find monitors that will actually work with a 15khz signal. Search google for "15khz tester".
Here's a list of monitors that I have found that WILL NOT WORK with a buffered VGA adapter and an Amiga 500 ntsc:
- Acer P206HL (doesn't work with 15khz tester)
- Acer V226HQL (doesn't work with 15khz tester)
- Acer V246HQL (doesn't work with a500 ntsc)
- Acer V203HL (doesn't work with a500 ntsc)
- Acer A231H (doesn't work with a500 ntsc)
- AOC e2460 (doesn't work with a500 ntsc)
- AOC 2036S (doesn't work with a500 ntsc)
- Asus VE278H (doesn't work with 15khz tester)
- Asus VE247 (doesn't work with 15khz tester)
- Asus VW246 (doesn't work with 15khz tester)
- Asus VS197 (doesn't work with a500 ntsc)
- Asus VS228 (doesn't work with 15khz tester)
- Benq XL2730Z (doesn't work with a500 ntsc, monitor says Cable not connected)
- Benq GW2765 (doesn't work with a500 ntsc)
- Dell U2412Mb (doesn't work with a500 ntsc, I have two of these and neither works)
- Dell E193FP (doesn't work with 15khz tester)
- Dell E2020 (doesn't work with 15khz tester)
- Dell E2210 (doesn't work with 15khz tester)
- Dell E2213 (doesn't work with a500 ntsc)
- Dell P2213 (doesn't work with a500 ntsc)
- Dell E2715 (doesn't work with 15khz tester)
- Dell 1907FPt (doesn't work with a500 ntsc)
- Dell 1908FP (doesn't work with 15khz tester)
- Dell P2311H (doesn't work with a500 ntsc)
- Dell P2217H (doesn't work with a500 ntsc)
- Dell 2407FP (doesn't work with a500 ntsc on VGA input, component video supports Amiga 500 ntsc with RGBS/VGA to YPbPr adapter)
- Dell 2408FP (doesn't work with a500 ntsc on VGA input, component video supports Amiga 500 ntsc with RGBS/VGA to YPbPr adapter)
- Dell S2240M (will work with a500 interlace but not normal non interlace 15khz)
- Dell 2007FP (VGA Amiga 15khz unsupported, but has a composite input that will display a500 monochrome composite video out)
- Dell P2213 (only interlace mode works and jittery, non interlace not supported)
- Dell E1909W (doesn't work with a500 ntsc)
- Dell IN2010 (doesn't work with 15khz tester)
- Gateway FPD2185W (get a decent a500 screen display with VGA but colors are completely wrong)
- Hanns-G HH241 (doesn't work with a500 ntsc)
- HP EliteDisplay E221 (doesn't work with 15khz tester)
- HP EliteDisplay E231 (doesn't work with 15khz tester)
- HP w2207 (doesn't work with 15khz tester)
- HP w2071d (doesn't work with a500 ntsc)
- HP V21 (doesn't work with a500 ntsc)
- HP 2509m (doesn't work with a500 ntsc)
- HP LP2465 (doesn't work with a500 ntsc)
- HP w2408 (doesn't work with a500 ntsc on vga input)
- LG E2241V-BN (doesn't work with a500 ntsc)
- LG Flatron IPS234W (doesn't work with 15khz tester)
- NEC Multisync LCD1850E (doesn't work with a500 ntsc)
- Samsung S22E450D (doesn't work with 15khz tester)
- Samsung S24E450D (doesn't work with a500 ntsc)
- Samsung S27E450D (doesn't work with a500 ntsc)
- Samsung C27F391FHN (doesn't work with a500 ntsc)
- Samsung E1920X (doesn't work with a500 ntsc)
- Samsung 173T (doesn't work with a500 ntsc)
- Samsung Syncmaster 2253LW (doesn't work with 15khz tester)
- Viewsonic VA2012 (doesn't work with 15khz tester)
- Viewsonic VA2246M-LED (doesn't work with 15khz tester)
- Viewsonic VA2248M-LED (doesn't work with 15khz tester)
- Viewsonic VA2448M-LED (doesn't work with 15khz tester)
- Viewsonic VX2250 (doesn't work with 15khz tester)
- Viewsonic VX2433 (doesn't work with 15khz tester)
Hello, in search of a working monitor I tested a few more monitors:
ADI Microscan PD-959: No support for 15KHz (neither 480i@60 nor 576i@50)
AOC I2369V (23" wide): Does not support 480i@60 (horizontal 15khz) nor 576i@50, tested only through vga.
BENQ W1508 (15" wide): Does not support 480i@60 (horizontal 15khz) nor 576i@50.