List of modern monitors that support 15 kHz analog RGB signals
Requirements
A list of modern flat panel (LCD, OLED) monitors that directly support analog 15 kHz signals through discrete RGB connectors (VGA, DVI-A, and/or SCART). (Note that Component video is actually YPrPb.)
"Full" 15 kHz RGB Support in the table below means it supports 15kHz signals at least as well as a CRT:
- The monitor requires no external scan doubler (such as an XRGB-mini or OSSC) or other powered devices to correctly process analog 15 kHz signals through the RGB connector. Only unpowered adapters are allowed for "full" support.
- The monitor is able to display the image centered and in the proper aspect ratio (4:3), shows every pixel of the source signal, and doesn't waste screen space. This means black or grey bars at the top and bottom (but not sides) of a 5:4 monitor and on the sides (but not top or bottom) of a 16:9 or 16:10 monitor.
- The monitor supports 240p/288p and 480i/576i and is usable in these modes without annoying flicker, at least not more annoying than a CRT's flicker.
- If the user needs to manually center or stretch the image, the settings persist across screen mode changes and power cycles.
"Partial" support deficiencies should be noted in the comments.
List of Monitors
BNE1| Make | Model | Panel Type | Diagonal Screen Size | H-Res | V-Res | Aspect Ratio | Video Inputs | 15 kHz RGB Support | Sync on Green | Comments |
|---|---|---|---|---|---|---|---|---|---|---|
| Acer | A221HQLBbd (UM.WA1AA.B02) | ? | 22 | 1920 | 1080 | 16:9 | VGA, DVI | Partial | ? | "does both NTSC and PAL" Laced modes not tested. |
| Acer | AL707 | TFT-CCFL | 17 | 1280 | 1024 | 5:4 | VGA | No | ? | Monitor is running on blank screen |
| Acer | G185H | Active Matrix TFT | 18.5 | 1366 | 768 | 16:9 | VGA | Partial | ? | "Syncs to NTSC, PAL, and Interlace/Double NTSC. Doesn't display Interlace/Double Pal. Doesn't correct Aspect Ratio, but otherwise looks surprisingly nice. SN: ETLJ70D00102201E568503" (specs) |
| Acer | G237HL | LED | 23 | 1920 | 1080 | 16:9 | VGA, HDMI | Partial | ? | Only tested on Sharp X68000. Unable to set aspect ratio but nothing is missing from the screen in low res mode. |
| Acer | G277HL Abid | VA-LED | 27 | 1920 | 1080 | 16:9 | VGA, DVI, HDMI | Full | ? | Works great on an Atari ST at Low and Medium color resolutions. Just used a simple RGB to VGA adapter. |
| Acer | G277HQL | VA-LED | 22 | 1920 | 1080 | 16:9 | VGA, DVI, HDMI | Full | ? | Works great on an Amiga 500 and 600. Just used a simple home-made passthrough RGB to VGA adapter. |
| Acer | G276HL Gbd | VA-LED | 27 | 1920 | 1080 | 16:9 | VGA, DVI | No | ? | |
| Acer | V223W | Unknown | 23 | 1680 | 1050 | 16:9 | VGA, DVI | No | ? | Nothing is supported in low res |
| Acer | G276HL Gbmid UM.HG6AA.G03 | VA-LED | 27 | 1920 | 1080 | 16:9 | VGA, DVI, HDMI | Full | ? | "This is the nicest LCD I have ever seen on Amiga. Just use a RGB to VGA adapter and it works VERY well. Highly Recommended. Added by R-C-MAN. (specs) |
| Acer | G276HL Lbidx | TN-LED | 27 | 1920 | 1080 | 16:9 | VGA, DVI, HDMI | Partial | ? | "Couldn't find a way to set aspect ratio and couldn't eliminate vertical timing bands completely. Overall not as nice as BenQ BL702A" |
| Acer | G276HL Lbmidx | TN-LED | 27 | 1920 | 1080 | 16:9 | VGA, DVI, HDMI | Partial | ? | "Does not honour aspect ratio for 4:3 / 5:4 sources. Clock and phase timings will not resolve moire on a checkerboard pattern." |
| Acer | P215H | TN-CCFL | 21.5 | 1920 | 1080 | 16:9 | VGA, DVI | Full | ? | Tested variant was most likely Acer P215H Bbd. Author did not provide more information. BBD varient tested with Amiga 500 buffered RGB to VGA adapter, did not work. |
| Acer | H236HL | IPS-LED | 23 | 1920 | 1080 | 16:9 | VGA, DVI, HDMI | Partial | ? | NTSC Amiga 500 with Workbench 1.2 |
| Acer | K222HQL | LCD | 21.5 | 1920 | 1080 | 16:9 | VGA, DVI, HDMI | Partial | ? | Interlaced modes don't work properly. |
| Acer | T232HL | IPS-LED | 23 | 1920 | 1080 | 16:9 | VGA, HDMI | Partial | ? | "works, but pixels are uneven and pretty ugly. Also can't take out of 16:9 mode." (specs) |
| Acer | V226HQL Bbd | TN-LED | 21.5 | 1920 | 1080 | 16:9 | VGA, DVI | ? | ? | "Nice monitor but new version is not 15khz. So will not work with Amiga, Atari computer." "I've been looking for a modern LCD that can handle the 15KHz modes that my old Amiga 500 outputs natively - this monitor works perfectly! May also work with older Atari ST and retrocomputers from similar eras." (specs) |
| Acer | V226HQL Bbd (UM.WV6EE.B20) | TN-LED | 21.5 | 1920 | 1080 | 16:9 | VGA, DVI | Full | ? | "Yes all 15khz modes work. All laced modes display, but flicker. All screen display fully, no pixels cut off or anything. There is an option to display in proper aspect ratio but it didn't seem to make much difference" |
| Acer | V226HQL (UM.WV6AA.B01) | TN | 21.5 | 1920 | 1080 | 16:9 | DVI, VGA | Full | ? | "Works well on an Amiga A500 with a passive VGA adapter. 2018 USA panels DO NOT support 15khz. (specs) |
| Acer | X193Wb (ET.CX3WP.002) | TN | 19 | 1440 | 900 | 16:9 | VGA | No | ? | "doesn't sync to 15 kHz" Monitor is reporting "Input Not Supported" |
| Acer | X193WCb (ET.CX3WP.C01) | TN | 19 | 1440 | 900 | 16:9 | VGA | Partial | ? | "syncs to 15 kHz in NTSC only and not PAL" Manufacturer is reffering to 1440x900@75Hz refresh rate. This is subject for test. |
| ALBA | LE-24GY15-T2+DVD-pink | Unknown | 24 | 1366 | 768 | 16:9 | HDMI RF SCART VGA | Unknown | ? | "Tested via SCART with A1200 revision 2B at 320x200, 320 x 256, 320x512, 640x200, 640x256, 640x512, 1280x256, 1280x512. First time I switched it on it had persistent flicker, 2nd time, 3rd time fine. Picture quality is ok (LG M2232 MUCH better for comparison - but the auto aspect ratio button on the remote does default the Amiga screen to 4:3 and centred. Pixel refresh rate appears higher than M2232D so interlace modes are terrible (they're ok on M2232D)). Important thing, it seems to work. Will test on Atari ST via RF later |
| AOC | 24E1Q | W-LED | 23.8 | 1920 | 1080 | 16:9 | HDMI, VGA, DisplayPort | Full | ? | PAL High res in AMIGA 500 working great over VGA. (proof) The monitor have basic speakers and can connect via a chinch -> 3 mm jack adapter. ATARI ST: Works well with Centurion ST2VGA adapter in all ST graphic modes. |
| AOC | 24E1H | IPS | 23.8 | 1920 | 1080 | 16:9 | HDMI, VGA, DisplayPort | No | ? | By mystake was bought instead of 24E1Q. Error on screen |
| Asus | 24T1EH | TFT-LED | 23.6 | 1920 | 1080 | 16:9 5:4 | HDMI, VGA, SCART, S-Video, Component, Composite, Tuner module | Partial (Full?) | ? | It's monitor with TV tuner. Does not support 15kHz over VGA, but supports over SCART, S-Video and Composite. Also available as 22" (22T1EH) and 27" (27T1EH). Also this monitor have very good scandoubler with flickerfixer for interlaced modes |
| Asus | VE228H | TFT | 21.5 | 1920 | 1080 | 16:9 4:3 | DVI-D VGA | Full | ? | Australian model tested. |
| Asus | VE248 | ? | ? | ? | ? | ? | ? | Partial | ? | A500 with full Overscan, both non-/interlaced works (but i. flickers) |
| Asus | VG249/VG249Q | IPS | 24 | 1920 | 1080 | ? | HDMI DP VGA | Partial | ? | A600 and A1200 ok : tested in PAL,NTSC,Euro72,Multiscan, interlaced work but its flickering. Very nice screen. |
| Asus | VW227D | TFT | 21.5 | 1920 | 1080 | 16:9 | VGA | Full? 2 | ? | (specs) |
| Beetronics | 17VG3 | IPS-LED | 17 | 1280 | 1024 | 5:4 | VGA, Composite, BNC, HDMI | No | ? | Beetronics has confirmed that this monitor supports 15kHz via VGA No, it dosen't work at all at 15Hz. Tested in AtariST + VGA Low Resolution Adapter. (specs) |
| BenQ | BL2205PT | ? | ? | ? | ? | ? | ? | Partial | ? | Doesn't remember screen position. Uncorrectable aspect ratio. |
| BenQ | BL702A | TN | 17 | 1280 | 1024 | 5:4 | VGA | Partial | Yes | Doesn't remember screen position. |
| BenQ | BL902-T | LED-Backlit | 19 | 1280 | 1024 | 5:4 | VGA, DVI-D | No | ? | Only laced modes are somehow working but with flickering and unreadable text |
| BenQ | BL912 | TN | 19 | 1280 | 1024 | 5:4 | VGA, DVI-D | Full | Yes | |
| BenQ | FFP222Wa | ? | ? | ? | ? | ? | ? | Full? | ? | Martin Brierley reports that PAL mode isn't supported on this monitor |
| BenQ | G2420HD | TFT | 24 | 1920 | 1080 | 16:9 | VGA, DVI, HDMI | Full? | ? | AUTO Adjust gives wrong clock, needs to manually adjust for perfect picture. BENQ G2420HDG does not work - Out of Sync |
| BenQ | G922HDL | ? | 18.5 | 1366 | 768 | 16:9 | DVI-D, VGA | Partial | ? | Does not do 15khz. Uncorrectable aspect ratio, interlaced mode flickers too much. (specs) |
| BenQ | G2222HDL | TN | 21.5 | 1920 | 1080 | 16:9 | DVI-D, VGA | Partial | ? | Amiga PAL/NTSC works (Low and high are usable, super high works, but texts are not readable). Uncorrectable aspect ratio. Interlaced flickers. Faint vertical banding. "Perfect" settings: H. Position 51 - V. Position 38 - Pixel clock 94 - Phase 7. Model 9H.L3RLN.IBE September 2010 (specs) |
| BenQ | GL2222HDL | TN | 21.5 | 1920 | 1080 | 16:9 | DVI-D, VGA | Partial | ? | Uncorrectable aspect ratio (specs) |
| BenQ | GW2480 | IPS-LED | 23.8 | 1920 | 1080 | 16:9 | VGA, HDMI, DP | Partial | ? | Update 2023-09-13 GW2480-B: Aspect ratio in games is always 16:9 and it is not correctable. Moreover, my unit shows noticeable vertical lines. They can be adjusted using pixel phase but not removed. Has speakers, connect using jack. Model ID: GW2480-B, Type: GW2480E, Rev.: 10-130-BL, P/N: 9H.LHELB.CBE, Tested on Amiga, All video modes working including ECS and AGA modes. Laced also works with classic Laced flickering. If certain video mode is applied then aspect ratio correction is not possible, but "it is so beautiful, that it even isn't needed" (as in a shrapness manner) when happens so. Monitor correctly reports input resolution. Certain video modes allows for aspect ratio correction (720x480@60 is correctable). |
| BenQ | GW2780T | IPS-LED | 27 | 1920 | 1080 | 16:9 | VGA, HDMI, DP | Full | ? | Has speakers, connect using jack. Model ID: GW2480-B, Type: GW2480E, Rev.: 10-130-BL, P/N: 9H.LHELB.CBE, Tested on Amiga, All video modes working including ECS and AGA modes. Laced also works with classic Laced flickering. If certain video mode is applied then aspect ratio correction is not possible, but "it is so beautiful, that it even isn't needed" (as in a shrapness manner) when happens so. Monitor correctly reports input resolution. Certain video modes allows for aspect ratio correction (720x480@60 is correctable). |
| Benq | V2400 Eco | TN | 24 | 1920 | 1080 | 16:9 | VGA, HDMI | Full? | ? | Tested with Escom Amiga A1200, works well (specs) |
| BenQ | XL2410T | ? | ? | ? | ? | ? | ? | Full? | ? | (specs) |
| BenQ | XL2411Z | TN | 24 | 1920 | 1080 | 16:9 | VGA, DVI-D, HDMI | Partial | ? | Manufacturer has 15kHz on VGA mentioned in data sheet, but needs testing. (specs) |
| BenQ | GL2250HM | TN | 21,5 | 1920 | 1080 | 16:9 | VGA, DVI-D, HDMI | No | ? | |
| Dell | 1707FPt | ? | 17 | 1280 | 1024 | 5:4 | DVI-D, VGA | No | ? | |
| Dell | 2001FP | TFT | 20 | 1600 | 1200 | 4:3 | Composite, DVI, S-Video, VGA | Partial | ? | Doesn't remember screen position. Units manufactured until June 2005 work, those September 2005 and later don't. Interlaced modes flicker badly with RGB but look great with S-Video. (specs) (Supports picture-in-picture). PD: Jul-02-2019 I purchased a model made in April 2005 but it will not work with PAL Amiga 1200 with RGB > VGA cable. JesperG: 06/6-2021, I found one from February 2005, it deos not work with native Amiga systems. It is possible to replace the main board of units after June 2005 with a board from an earlier model, I replaced a 48.L1V01.A01 board with an earlier 48.L7501.A04 board an it now works. Bigendian: 5/28/2022, my 2001FP is dated July 2004. Tested unsuccessfully with a 15KHz arcade PCB (known working) and it just displayed "can not display this mode". Bernouilli: 10/18/2022, my 2001FP is dated November 2004 and it works fine with Atari 1040STE in color mode. But I have to correct the screen position each time. |
| Dell | 2007FPb | TFT | 20 | 1600 | 1200 | 4:3 | Composite, DVI, S-Video, VGA | No | ? | Only Composite/SVideo accept 15khz, VGA not (testet with MDA/EGA/CGA 15/18/22kHz) |
| Dell | E1912HF | TN | 18,5 | 1366 | 768 | 16:9 | VGA | Full | ? | Works brilliantly. NOTE: ONLY units marked as REV A00 will work. REV A01 WON'T work (check the back label). |
| Dell | E1914H | TN | 19 | 1366 | 768 | 16:9 | VGA | Full? link2 | ? | Units with a part number of 4FF47 (made in November 2014) do work, but those with part number NJVXM (made in March 2015) don't. The part number can be found between the first and second hyphen in the serial number, without the leading zero. (specs) |
| Dell | P190S | TN | 19 | 1280 | 1024 | 5:4 | VGA, DVI-D | No | ? | The current input timing is not supported by the monitor display. (proof) |
| Dell | P1917S | IPS | 19 | 1280 | 1024 | 5:4 | VGA, DP, HDMI | Partial | ? | Supports only full Hi-Res (e.g 640 x 512) modes, laced ones are with very strong flicker. Does not display Lo-Res or mixed modes. |
| Dell | P2010H | TN | 20 | 1600 | 900 | 16:9 | VGA, DVI-D | Full | ? | Works in all mode on a atari ST low/mid/high, low banding in all modes |
| Dell | P2210H | TN | 20 | 1600 | 900 | 16:9 | VGA, DVI-D | Full | ? | Works in all mode on a atari ST low/mid/high, low banding in all modes |
| Dell | P2210T | TN | 22 | 1680 | 1050 | 16:10 | VGA, DVI-D, HDMI | NONE | ? | Seems to work well in all modes tested in. (specs) - Bought one, DOES NOT WORK AT ALL, Gives message sync is not supported. Suspect dealers selling old junk make this post - MONITOR IS NOT SUPPORTED. |
| Dell | P2214H | TFT | 22 | 1920 | 1080 | 16:9 | VGA, DVI-D, HDMI | Full | ? | Seems to work well in all modes tested in. (specs) |
| Dell | P2214Hb | TFT | 22 | 1920 | 1080 | 16:9 | VGA, DVI-D, DisplayPort | FULL | ? | 15 KHz works in both NTSC and PAL with a plain VGA cable. All modes worked perfectly on A500 rev 5 board with ECS Chipset. Auto resized when changing from Pal-NTSC and games displayed properly and full screen in 4:3 with no clipping. Has several internal settings, but other than changing my color, brightness and contrast preference, I used it straight out of the box. Someone changed my review and entered severely WRONG info. You need to NOTE the date, revision and year for USING monitors posted here that DO WORK. Model number used is P2214hb Rev A06 December 2015., NOT 2016, NOT 2014, NOT 2214, NOT rev b, etc.. |
| Dell | P2217H | IPS | 22 | 1920 | 1080 | 16:9 | VGA, DVI-D, DisplayPort, HDMI | No | ? | |
| Dell | SR2320L | ? | 23 | 1920 | 1080 | 16:9 | DVI, HDMI, VGA | Partial | ? | Doesn't remember screen position. A few pixels lost in some modes. (specs) |
| Dell | ST2320L | TN | 23 | 1920 | 1080 | 16:9 | DVI-D, HDMI, VGA | Full? | ? | (specs) |
| Dell | ST2410 | TFT | 24 | 1920 | 1080 | 16:9 | DVI-D, HDMI, VGA | Full? | ? | (specs) |
| Dell | U2211Ht | IPS | 21.5 | 1920 | 1080 | 16:9 | VGA, DVI-D, DisplayPort | Partial | ? | Works out of the box, it will not accept some resolutions, great picture. (specs) |
| Dell | U2311H | IPS | 23 | 1920 | 1080 | 16:9 | DisplayPort, DVI-D, VGA | Full? | ? | (specs) confirmed working 29/06/18 with RGB-to-VGA adapter from Amigakit. Recommended settings to remove vertical banding (menu, display settings) - H position 20, Pixel Clock 90, Phase 30 (A500) or 60 (A1200). May depend on individual Amiga. |
| Dell | U2312HMt | IPS | 23 | 1920 | 1080 | 16:9 | DisplayPort, DVI-D, VGA | Full | ? | HiRes/LowRes PAL works with pixel and phase adjustments, I ended up with Pixel Clock 94, Phase 74, but it might depend on your hardware, Tested with a buffered RGB->VGA adapter on Amiga. It can also run DblPAL but you need to tweak the TotClk value on the Amiga and Pixel/Phase on the monitor if you want it perfect, you might also need to run borderblank for it to sync. Seems to display NTSC modes too however this wasn't tested much. |
| Dell | U2410 | IPS | 24 | 1920 | 1200 | 16:10 | Component, Composite, DisplayPort, DVI-D, HDMI, VGA | Full? | Yes | (specs) (Supports picture-in-picture) |
| Dell | U2412M | IPS | 24 | 1920 | 1200 | 16:10 | DisplayPort, DVI, VGA | [NO] | ? | Units manufactured in September 2014. U2412M tested July 2022 with Amiga 500/500+/600. Black screen only, not supported. |
| Dell | U2412MC | IPS | 24 | 1920 | 1200 | 16:10 | DVI, VGA | [NO] | ? |
Units manufactured in July2019. U2412MC tested Jan 2023 with Amiga 500,600,1200. Monitor is running on black screen. |
| Dell | U2711 | IPS | 27 | 2560 | 1440 | 16:9 | Component, Composite, DisplayPort, DVI-D, HDMI, VGA | Partial | ? | (specs) Jitters, dark and blurry through VGA, but it definitely works. |
| Dell | U2713HM | IPS | 27 | 2560 | 1440 | 16:9 | DisplayPort, DVI-D, HDMI, VGA | No | ? | Tested U213HMt manufactured May 2014 in China. This monitor needs a flicker-fixer to work, but with the flicker-fixer on the Amiga 3000 enabled the experience is okay and somewhat similar to the U2412M (menu's, etc). The U2412M is a more appropriate choice though, and mine does not need a flicker fixer. |
| Eizo | FlexScan EV2450 | IPS | 23.8 | 1920 | 1080 | 16:9 | DisplayPort, DVI-D, HDMI, VGA | Partial | ? | "Signal error" shown, unable to change any settings. Picture is nice, though. |
| Eizo | FlexScan S1931 | VA-CCFL | 19 | 1280 | 1024 | 5:4 | VGA, DVI | No | ? | No Sync (50Hz impossible). (specs) |
| Eizo | FlexScan L771? | TFT | 19 | 1280 | 1024 | 4:3 | DVI-D, VGA | Partial | ? | Persistant "Signal error" shown, picture scaled down. Model number needs varification, back of the monitor was damaged. Tested with an Enterprise 128. (proof) |
| Eizo | FlexScan L568 | IPS | 17 | 1280 | 1024 | 4:3 | DVI-D, VGA | Partial | ? | Persistant "Signal error" shown, Does sync @15Khz, @30Khz - 50hz and 60hz. Picture is good. |
| Eizo | FlexScan L768 | IPS | 19 | 1280 | 1024 | 4:3 | DVI-D, VGA | Partial | ? | Persistant "Signal error" shown, Does sync @15Khz, @30Khz - 50hz and 60hz. Picture is good. Tested with an Enterprise 128. (proof) |
| Epson | EB-X11 | ? | ? | 1024 | 768 | 4:3 | VGA | Partial | ? | Projector (specs) |
| Fujitsu | B22W-5 ECO | TFT-LED | 22 | 1680 | 1050 | 16:10 | VGA, DVI | No | ? | Monitor is running on black screen. |
| Fujitsu | B22W-7 ECO | TFT-LED | 22 | 1680 | 1050 | 16:10 | VGA, DVI, DisplayPort | Full | ? | Tested with Amiga 500 and Commodore 390682-01 |
| Fujitsu | B24W-6 | TN | 24 | 1920 | 1200 | 16:10 | DisplayPort, DVI, VGA | Partial | Image adjust supports Full screen, Keep aspect and 1:1. | Tested on Atari 520 STE with UBEswitch RGB=>VGA=>VGA. Lo-, mid- and hi-res supported. Scales and keeps aspect ratio, but doesn't fill screen in hi-res. In hi-res the image is centered, but aligned slightly below the top of the screen. |
| Fujitsu | B24T-7 | TN | 24 | 1920 | 1080 | 16:9 | HDMI, DVI, VGA | Partial | Image adjust supports Full screen and Keep aspect. | Tested on Atari 520 STE with UBEswitch RGB=>VGA=>VGA. Lo-, mid- and hi-res supported. Scales and keeps aspect ratio, but doesn't fill screen in hi-res. In hi-res the image is centered, but aligned with the top of the screen. |
| Fujitsu | E19-5 | TN | 19 | 1280 | 1024 | 4:3 | VGA | No | ? | Frequency out of range (proof) |
| Fujitsu | L19T-4 | TFT-TN | 18.5 | 1366 | 768 | 16:9 | VGA | No | ? | Tested on Amiga with RGB to VGA adaptor, displays out of range for 15Khz. |
| Fujitsu Siemens | Scaleoview L19-2 Model L9ZA K1117-V173 | TN | 19 | 1280 | 1024 | 5:4 | VGA | No | ? | Not working. Monitor reports invalid signal on black screen |
| HP | E190i | IPS-LED | 19 | 1280 | 1024 | 5:4 | DVI-D, VGA, DP | No | ? | |
| HP | Pavilion 22xi | IPS | 21.5 | 1980 | 1080 | 16:9 | DVI-D, VGA, HDMI | No | ? | Atari Ste High mode gave me 2 different results on 2 machines (with ST2VGA). the first blink, second scintillate on the background Grey color. |
| HP | EM869A | ? | 19 | 1280 | 1024 | 5:4 | DVI-D, VGA | No | ? | |
| IBM | 6656-HW2 | TFT | 15 | 1024 | 768 | 4:3 | VGA | Full | ? | out of range. |
| Idek/Iiyama | Prolite XU2290HS-B1 | LCD | 21.5 | 1920 | 1080 | 16:9 | DVI-D, VGA | Yes | ? | Despite official specs (https://iiyama.com/fr_fr/produits/prolite-xu2290hs-b1/#specification), it works. Tested on Atari ST (https://www.exxoshost.co.uk/forum/viewtopic.php?f=18&t=3465&p=52968#p52968) stretched to 16/9, less visible at 60Hz. |
| Iiyama | Prolite XB3270WQS | IPS | 30 | 2560 | 1440 | 16:9 | VGA, DVI, DisplayPort, HDMI | No | ? | Tested with Atari 1040STE in low res mode. |
| Iiyama | Prolite B2483HS-B3 | TN | 24 | 1920 | 1080 | 16:9 | VGA, DisplayPort, HDMI | Partial | ? | Tested with Atari 1040STE using Centuriontech ST2VGA r4 in all three resolutions. Some vertical banding in dark greys and blues. Desktop is perfect and clear of lines, visually at normal viewing distances. Not sure if all "B3" models will work, assuming the "B3" is the version number. Nothing else on the back other than serial number. Also tested my Amiga 500+, which works in all normal 15KHz resolutions. Usual flickering in interlaced modes and text is corrupted. Note: Productivity modes (Multiscan) do not work. Used Amiga*Kit RGB to VGA Adapter. Changed to "Partial" as have been unable to access "Aspect ratio" menu in display. Aspect is forced to 16:9 |
| Insignia | NS-20EM50A13 | ? | 20 | 1600 | 900 | 16:9 | DVI-D, VGA | No | ? | VGA EDID implies 1024×768 maximum |
| Lenovo | LT2252P | LED | 22 | 1680 | 1050 | 16:10 | VGA, HDMI, Display Port | Partial | No | Monitor supports standard Amiga 15kHz PAL/NTSC modes and 30/31kHz modes. Interlaced modes display OK, but with flicker. No support for 20-28kHz video modes. |
| Lenovo | Q24i-10 | IPS-LED | 23.8 | 1920 | 1080 | 16:9 | VGA, HDMI | Partial | ? | Monitor supports 15kHz, but It was tested only on FPGA induced 15kHz. It was never tested on real hardware. Still "The price is right and it is a bargain as it is available in stores as we speak (April 2021) and it has speakers inside, it works with 50Hz PAL modes and 15kHz vertical scan rates. This turned out to be a great buy!" |
| LG | D2542P-PN | TFT | 25 | 1920 | 1080 | 16:9 | VGA | No | ? | "out of spec 15kHz/50Hz" |
| LG | DM2780D | TFT | 27 | 1920 | 1080 | 16:9 | VGA | No | ? | "15kHz/50Hz Invalid Format" |
| LG | 1721A | TFT | 17 | 1280 | 1024 | 5:4 | Composite, S-Video, VGA, Tuner module | Full | ? | Uses Hsync or Csync on pin 13, or thru Composite input |
| LG | L1718S | TFT | 17 | 1280 | 1024 | 4:3 | VGA | No | ? | Out of range (proof) |
| LG | L1918S | TFT | 19 | 1280 | 1024 | 4:3 | VGA | No | ? | Out of range (proof) |
| LG | M1717A | TN | 17 | 1280 | 1024 | 5:4 | VGA, S-Video, SCART, Composite, Tuner module | Full | ? | |
| LG | M1917A | TN | 19 | 1280 | 1024 | 5:4 | VGA, S-Video, SCART, Composite, Tuner module | Full | ? | |
| LG | 1921A | TFT | 19 | 1280 | 1024 | 5:4 | Composite, S-Video, VGA, Tuner module | Full | ? | |
| LG | M1921A | TFT | 19 | 1280 | 1024 | 5:4 | SCART, Composite, S-Video, VGA, Tuner module | Partial/Full | ? | beware of the "M" version - easy to be mistaken for a 1921A which works perfectly. Exists 2 version of the model. First have 2 jack ports in vertical, second not. First working great via SCART and VGA, second work only with SCART but flickering. (First and Second) |
| LG | M198WA | ? | 19 | 1440 | 900 | 16:10 | Component, Composite, DVI, S-Video, SCART, VGA | Full | ? | Works with an Amiga 600 SCART RGB at all PAL resolutions. Some flicker in interlaced modes when Intuition is drawing the screen, but no noticable flicker at 640x256p or 1200x256p. Needs to be manually put in 4:3 aspect on first use. (Service Manual), (Operation & User’s Manual) |
| LG | M2232D-PZ | TFT | 22 | 1920 | 1080 | 16:9 | Composite, HDMI, SCART, VGA, Tuner module | Full* | ? | * Not according to specification - but it does. Tested with Amiga 1200 1D4 at 320x200, 640x200, 640x256, 640x512, 1280x256, 1280x512, via composite and RGB Scart. Works really well with RGB SCART. Also works with PlayStation 2 via SCART in SDTV mode. Also works on Atari 520STFM connected by modulator RF cable in low and medium res. When i switch the SCART connected Amiga off, TV automatically returns to the Atari screen. Bonus. |
| LG | M2382D-PZ | TFT | 23 | 1920 | 1080 | 16:9 | Composite, HDMI, SCART, VGA, Tuner module | Full* | ? | * Not sure about specification, situation maybe similar as in case of M2232D-PZ. It works perfectly though via RGB<>SCART cable with such Amigas: A500 R6, A600 1.5&2.0, A1200 1D3, 1D4, 2B, CD32 Rev4, A4000D and A4000T |
| LG | M228WA | TN | 22 | 1680 | 1050 | 16:10 | Component, Composite, DVI, SCART, S-Video, VGA | Partial | ? | (specs) |
| Medion | MD 32117 PQ | TFT-CCFL | 17 | 1280 | 1024 | 5:4 | VGA | No | ? | Monitor reports mode not supported. |
| NEC | LCD1501 | Active Matrix TFT | 15 | 1024 | 768 | 4:3 | VGA | No | ? | Did not accept 15kHz |
| NEC | LCD1550M | Active Matrix TFT | 15 | 1024 | 768 | 4:3 | VGA | Full | ? | "All modes are working fine (including hires, super hires, laced/non-laced). This is TN only screen, so don't expect superb quality, but for games/demos is enough." The guy has a Polish name. Assuming it was PAL Amiga. (specs) |
| NEC | LCD170V | TN | 17 | 1280 | 1024 | 5:4 | VGA | No | ? | |
| NEC | LCD195NX | TN | 19 | 1280 | 1024 | 5:4 | DVI-D, VGA | No | ? | Out of Range. Testet with EGA/CGA/MDA (15/18/21kHz) |
| NEC | LCD195VXM+ | TN | 19 | 1280 | 1024 | 5:4 | DVI-D, VGA | No | ? | Does not sync. Probably same applies to sister model LCD175VXM+/ |
| NEC | LCD1700M+ | TFT | 17 | 1280 | 1024 | 5:4 | VGA | No | ? | Shows that "Input is out of Range". |
| NEC | LCD1760Nx | TFT | 17 | 1280 | 1024 | 5:4 | VGA | No | ? | No Signal and orange LED at 15/18kHz, to high frequency at 22 kHz |
| NEC | LCD1770Nx | TFT | 17 | 1280 | 1024 | 5:4 | VGA | No | ? | Shows that "Input is out of Range". |
| NEC | LCD1960NX | TFT | 19 | 1280 | 1024 | 5:4 | VGA, DVI-D | No | ? | |
| NEC | LCD1970GX | TN | 19 | 1280 | 1024 | 5:4 | VGA, DVI-D | Partial | ? | Interlaced modes don't work properly. |
| NEC | LCD1970VX | TFT | 19 | 1280 | 1024 | 5:4 | VGA, DVI-D | / Full | ? | (2021-02-14: new review / test report) |
| NEC | LCD1970NX | TFT | 19 | 1280 | 1024 | 5:4 | VGA, DVI-D | [Full] | ? | Work full with 15kHz and above. Tested with EGA, MDA and CGA]) |
| NEC | LCD1970NXp | TFT | 19 | 1280 | 1024 | 5:4 | VGA, DVI-D | Partial | ? | This one can even handle interlaced modes of Amiga 500, 1200 and not properly on Falcon 030. Has vertical stripes with many games (depending on their precise vertical refresh rate, like 49,8Hz or 49,9Hz), which can be compensated by using the 'automatic' setting in a game that actually works fine without stripes (i.e. Xenon II). There is an optional stereo soundbar with 3.5 inch connector available for this monitor, which can be attached to the bottom of the monitor. PAL Hi-Res does NOT work right! The image is vertically stretched about twice the display's height! The monitor and soundbar was available in white and blgack/silver color. The "p" stands for PVA. (another test) (specs) |
| NEC | LCD1990NXP | TN | 19 | 1280 | 1024 | 5:4 | DVI-I, VGA | Full | ? | Seems to work well in all modes tested in. The model is also available in 21inches (LCD2190NXp) |
| NEC | LCD1990SX | PVA | 19 | 1280 | 1024 | 5:4 | DVI-I, VGA | No | ? | |
| NEC | LCD1990SXi | TN | 19 | 1280 | 1024 | 5:4 | DVI-I, VGA | Full | ? | Seems to work well in all modes tested in. The model is also available in 21inches (LCD2190SXi) |
| NEC | LCD1990FXP | TN | 19 | 1280 | 1024 | 5:4 | DVI-I, VGA | Full | ? | Seems to work well in all modes tested in. On atari ST range, image is not full screen but no banding at all with some adjustment of pitch and black deepness |
| NEC | LCD2070NX | TFT | 20 | 1280 | 1024 | 5:4 | DVI-D,VGA | No | ? | Shows that "Input is out of Range". |
| NEC | LCD2170NX | TFT | 21 | 1280 | 1024 | 5:4 | VGA, DVI-D | No | ? | Tested with EGA, MDA and CGA and show only "Out of Range" |
| NEC | LCD92V | TFT | 19 | 1280 | 1024 | 5:4 | VGA | No | ? | Tested with an Amiga 500+, monitor reports "Out of Range" |
| NEC | E222W | TN | 22 | 1680 | 1050 | 16:10 | DVI-D, VGA | Full | ? | Seems to work well in all modes tested with ATARI ST (| result see here, .Tested on AMIGA 1200(PAL) 03.03.2023 - Works OK in low res/Amiga 500, but interlaced Modes won't sync. | specs see here) |
| NEC | EA190M | TN | 19 | 1280 | 1024 | 5:4 | DVI-D, VGA, Audio | Partial | ? | Interlaced modes don't sync. Has audio speakers. |
| NEC | EA192M | TN | 19 | 1280 | 1024 | 5:4 | DVI-D, DisplayPort, VGA, Audio | Fulll | ? | Fullname NEC MultiSync EA192M. Tested with Amiga 500 and Commodore 390682-01. Has audio speakers. |
| NEC | EA193Mi | AH-IPS | 19 | 1280 | 1024 | 5:4 | DisplayPort, DVI, VGA | Partial | ? | Uncorrectable aspect ratio. (specs) |
| NEC | EA222WMe | TN | 22 | 1680 | 1050 | 16:10 | DisplayPort, DVI, VGA | Partial | ? | Uncorrectable aspect ratio. PAL Interlaced modes don't sync. |
| NEC | EA221WMe | TN | 22 | 1680 | 1050 | 16:10 | DVI-D, VGA, Audio | Partial | ? | Interlaced modes don't sync. Has audio speakers. |
| NEC | LCD51V | TFT | 15 | 1024 | 768 | 4:3 | VGA | Partial | ? | Laced modes cause flickering. (specs) |
| NEC | LCD52VM | TFT-CCFL | 15 | 1024 | 768 | 4:3 | VGA | No | ? | Monitor reports no signal. |
| NEC | Accusync LCD71V | TFT | 17 | 1280 | 1024 | 5:4 | VGA | Full | ? | Fully supported, but 480i flicker is annoying and my copy of the screen (rev. 1G) has faint vertical banding in 15 kHz modes. Narrow viewing angle. |
| NEC | Accusync LCD71Vm | TFT | 17 | 1280 | 1024 | 5:4 | VGA | Full | ? | Fully supported |
| NEC | Accusync LCD72VM | TFT | 17 | 1280 | 1024 | 5:4 | VGA | No | ? | Monitor reports no signal. |
| Panasonic | TH-42PWD6UY | Plasma | 42 | 852 | 480 | 16:9 | ? | ? | ? | Works perfectly over SCART RGB |
| Panasonic | TX-L42D25B | LCD | 42 | 1920 | 1080 | 16:9 | ? | ? | ? | Works on A1200 Rev2B with SCART RGB cable, but requires H position adjustment via service menu to center the screen. Will output in all resolutions, best found to be 640x512 interlaced. Could not get it to work with 15kHz VGA. (https://www.manualslib.com/manual/442861/Panasonic-Txl42d25.html?page=107#manual) |
| Philips | Brilliance 272P7V | LCD | 27 | 3840 | 2160 | 16:9,4:3,1:1 | HDMI/VGA/DISPLAY PORT/DP MINI | Full? | PIP + BIB | Aspect ratio has to be set manually and is kept across all screen modes and inputs. Picture is very nice, though. Interlace flicker is much less uncomfortable than on other LCD screens. Perhaps the only 4K display with VGA port and 15kHz capability! |
| Philips | Brilliance 240BW9CB | TFT-CCFL | 24 | 1920 | 1200 | 16:9,4:3,1:1 | VGA, DVI-D | No | Yes | Requires CSYNC to RGBHV circuit such as LM1980 to sync at all. 24-94KHz only, 480i and above only. specs |
| Philips | Brilliance 240V | IPS | 24 | 1920 | 1080 | 16:9 | HDMI/DVI-D/VGA | ? | ? | 240V5QDSB/00, 15kHz VGA tester works, Amiga/Atari not tested yet. Update 31.01.2023-Tested on Amiga 600. Works but there are vertical lines on screen, clock adjustment helps, but it is not perfect. |
| Philips | Brilliance 241B | IPS | 24 | 1920 | 1080 | 16:9 | HDMI/DVI-D/VGA | Full | ? | 241B7QPJKEB/00, 15kHz VGA works, Atari STe tested and all modes are fully supported - minor flicker on interliced mode |
| Planar | 1520M | TFT | 15 | 1024 | 768 | 4:3 | Composite, S-Video, VGA | Full? | ? | If you change resolutions, you have to readjust the picture. (specs) |
| Polaroid | P24RP0108A | Unknown | 24 | 1366 | 768 | 16:9 | VGA, Composite, HDMI | Full | ? | Although this is a TV it has a VGA input. I have tested it using a PAL Amiga 500 using an AmigaKit VGA adapter. All games run full screen so are a bit stretched. |
| Samsung | LN40B540P8F | ? | 40 | 1920 | 1080 | 16:9 | Component, Composite, HDMI, VGA | No | ? | |
| Samsung | SyncMaster 214T | SPVA-CCFL | 21 | 1600 | 1200 | 4:3 | CVBS, S-Video, VGA, DVI-D | No | ? | Does not support 15kHz over VGA, supports only over Composite and S-Video. |
| Samsung | SyncMaster 510N | Active Matrix TFT | 15 | 1024 | 768 | 4:3 | VGA | Partial | ? | Some users report success. One user with a PAL Amiga 500 reports an NTSC 510N manufactured March 2015 in Malaysia won't sync at 15kHz using an unbuffered adapter. (specs) |
| Samsung | SyncMaster 710N | Active Matrix TFT | 17 | 1280 | 1024 | 5:4 | VGA | Partial | ? | Some units reportedly have 740N internals and cannot sync at 15 kHz. (specs) |
| Samsung | SyncMaster 710V | TFT TN A-Si | 17 | 1280 | 1024 | 5:4 | VGA | No | ? | Screen is scrmbled tested on Amiga with RGB to VGA adapter |
| Samsung | SyncMaster 713BM | TFT TN | 17 | 1280 | 1024 | 5:4 | VGA, DVI-D | No | ? | |
| Samsung | SyncMaster 713N | TFT TN | 17 | 1280 | 1024 | 5:4 | VGA, DVI-D | No | ? | "Not optimum mode. Recommended mode: 1280x1024 60Hz" (proof). Tested on Atari 1040STE in color mode with VGA adapter |
| Samsung | SyncMaster 720N | TFT TN | 17 | 1280 | 1024 | 5:4 | VGA | No | ? | "Not optimum mode. Recommended mode: 1280x1024 60Hz" (proof) |
| Samsung | SyncMaster 741MP | LCD | 17 | 1280 | 1024 | 5:4 | VGA,RGB,S-Video,Composite | Partial | ? | Amiga 500 does work over SCART RGB with reasonable quality, but with a very slight flicker. Does not support 15Khz VGA |
| Samsung | SyncMaster 910MP | TN | 19 | 1280 | 1024 | 5:4 | Component, DVI, S-Video, SCART, VGA | Partial | ? | Really blurry with 240p and 480i. Does not support 15kHz over VGA, only SCART. (specs) |
| Samsung | SyncMaster 913N (S) | TN | 19 | 1280 | 1024 | 5:4 | VGA | No | ? | perfect image in pal hires on atari, low res not supported |
| Samsung | SyncMaster 940BE | TFT | 19 | 1280 | 1024 | 5:4 | DVI, VGA | Partial | good on SGI w/cheap 13W3 adapter | "sometimes difficult to get it to sync without jitter, but you can do it" (specs) |
| Samsung | SyncMaster 940MW | TN | 19 | 1440 | 900 | 16:10 | DVI-D, VGA | No | ? | (specs) |
| Samsung | SyncMaster 2032MW | Active Matrix TFT | 20 | 1680 | 1050 | 16:10 | VGA, SCART, Composite, S-Video, Component, DVI | Partial | ? | Does not support 15kHz over VGA. SCART has confirmed support. Two Amigas can be connected over SCART and Composite in vertical split-screen mode. (specs) |
| Samsung | SyncMaster SA350 (S23A350H) | ? | 23 | 1920 | 1080 | 16:9 | HDMI, VGA | No | ? | (specs) |
| Samsung | SyncMaster T220HD | TFT-CCFL | 22 | 1680 | 1050 | 16:10 | VGA, DVI, HDMI | No | ? | Does not work on my A1200. Only if SCART connector exists. (specs) |
| Samsung | Samsung XL2370 (EF23WS) | TFT | 23 | 1920 | 1080 | 16:9 | DVI, HDMI | No | ? | Not working. Monitor reports 15kHz/50Hz as invalid signal |
| Samsung | Samsung UE32B6000 | TFT | 32 | 1920 | 1080 | 16:9 | VGA, HDMI, SCART RGB, SCART S-Video, SCART Composite, RCA Composite, RCA Components YPrPb, antenna in (analog TV and digital TV tuners) | Full | ? | Tested with Amstrad CPC 464 and 6128 with SCART adapter cable. Amstrad CPC produce RGB signals with 15KHz line, 50Hz field frequencies (a.k.a. 288p50). Interlaced/composite SCART tested with Sony TRV110E camcorder and Nintendo64 with composite output. Component YPrPb signals tested with Sanyo Xacti HD2000 camcorder in 576i50 mode. Most probably, other Samsung models similar to this one will work, too. The TV accepts 15kHz/50Hz (all variants) on SCART and component connectors, not on VGA input. All 4 criteria of "full support" satisfied, even very good deinterlace (static parts of picture appear totally flicker-free) and, on composite input, some (probably time-based) filtering of color bleed. |
| Samsung | SyncMaster 940Fn | VA | 19 | 1280 | 1024 | 4:3 | DVI x2 | No | ? | |
| Sharp | Aquos LC-32LE700UN | LCD-LED | 32 | 1920 | 1080 | 16:9 | VGA, Composite, S-Video, Component, HDMI | Full | ? | "And much to my incredible surprise, besides having an amazing picture w/LED full panel lighting - the damn thing actually displays 50/60Hz 15Khz RGB video!!" |
| Sony | SDM-S71R | LCD | 17 | 1280 | 1024 | 5:4 | VGA | No | ? | Accept no 15/18/22kHz "Nicht im Abtastbereich" Proof: www.pc-rath.de/Sony SDM-S71R.JPG |
| Videoseven | L19WA | TFT | 19 | 1440 | 900 | 16:9 | VGA | No | ? | Out of range |
| Xerox | XL370b | TFT | 17 | 1280 | 1024 | 5:4 | VGA | Full | ? | Untested, but numerous times mentioned as supported. Links suggesting full compatibility mostly dead. |
page revision: 443, last edited: 06 Dec 2023 09:43